QINGDAO GLOBALSTAR GLASS TECHNOLOGY CO., LTD.
QINGDAO GLOBALSTAR GLASS TECHNOLOGY CO., LTD.
QINGDAO GLOBALSTAR GLASS TECHNOLOGY CO., LTD.
Clear float glass is flat soda-lime glass formed on a molten tin bath.
Thickness references: 3 / 4 / 5 / 6 / 8 / 10 / 12 / 15 / 19 mm.
Sheet format examples: 1830 × 2440; 2134 × 3300; 2440 × 3660 mm.
Finished panels: Cut to the approved dimensions.
Send drawings, quantities and destination details for a project quotation.
Thickness references: 3 / 4 / 5 / 6 / 8 / 10 / 12 / 15 / 19 mm. Ask separately about thin sheets and current availability.
Sheet format examples: 1830 × 2440; 2134 × 3300; 2440 × 3660 mm. Reference supply formats; confirm thickness and batch availability.
Finished panels: Cut to the approved dimensions. Sheet format does not establish finished processing limits.
Edge options: Cut, ground or polished edges. Identify exposed edges and handling requirements.
Further processing: Tempering, lamination, coating or IGU assembly. Confirm compatibility and the full finished specification.
Clear float glass is flat soda-lime glass formed on a molten tin bath. It is a starting material for windows, furniture, mirrors and further glass processing. Globalstar Glass supports distributors and fabricators with sheet supply and made-to-size enquiries. Ordinary annealed float glass must be distinguished from tempered and laminated safety glass when specifying a finished application.
Illustrative product concept and material details; not a completed-project photograph or test evidence. Final construction follows the approved order.
Examples support quotation discussions. Confirm availability, production feasibility and the final specification before ordering.
| Item | Reference specification | What to confirm |
|---|---|---|
| Thickness references | 3 / 4 / 5 / 6 / 8 / 10 / 12 / 15 / 19 mm | Ask separately about thin sheets and current availability. |
| Sheet format examples | 1830 × 2440; 2134 × 3300; 2440 × 3660 mm | Reference supply formats; confirm thickness and batch availability. |
| Finished panels | Cut to the approved dimensions | Sheet format does not establish finished processing limits. |
| Edge options | Cut, ground or polished edges | Identify exposed edges and handling requirements. |
| Further processing | Tempering, lamination, coating or IGU assembly | Confirm compatibility and the full finished specification. |
| Appearance | Clear glass with a natural green edge tint | Discuss low-iron glass where colour neutrality matters. |
State whether the order is for full sheets, cut sizes or processed components. Provide the cutting list, finished dimensions and quantities for each thickness. Agree visual inspection, edge finish and dimensional tolerances before production, particularly for mirror processing and furniture components.
Annealed clear float glass is a substrate rather than a universal safety glazing solution. The project designer should identify any need for tempering, lamination or an insulating unit. Complete holes, notches and edge machining before tempering when heat treatment is specified.
Keep sheets dry, supported and protected from abrasive contact. Review separators, moisture protection and unloading equipment for the destination. Stained surfaces or damaged edges can affect subsequent processing, so agree incoming inspection and traceability for batch purchases.
The workshop has cutting and edging equipment, two tempering lines, two lamination lines and one IGU line for further processing. General tempering planning throughput is around 20 tonnes per line per day, with approximately 27 tonnes under suitable loading. These are processing references, not float-furnace output or a delivery commitment for raw sheets.
Use suitable sheet racks or protective crates with separators and edge protection. List thickness, sheet format, quantity and batch identification on the packing list; confirm storage and lifting conditions before dispatch.
Send sheet formats or a cut-size schedule, thickness, quantity, processing requirements, inspection criteria, destination port and target delivery date.
Send your specifications to Globalstar Glass for technical and commercial review.
Related products: low-iron glass and tempered laminated glass.
No. Ordinary float glass is annealed unless heat treatment is explicitly included in the order.
The natural composition can produce a green edge tint. Request low-iron material for a more neutral appearance.
Submit finished dimensions and edge requirements for processing review and quotation.
No. Confirm current availability for the chosen thickness, format and quantity.
The designer must specify the complete safety-glazing construction and support system for the application.
Source custom greenhouse glass panels. Review 4–6 mm reference options, roof and wall layouts, edge details, packing and quotation requirements.
Source clear float glass sheets and cut-to-size panels. Review 3–19 mm references, sheet formats, edge processing, packing and B2B order details.
Low-iron ultra-clear glass for displays, furniture and further processing. Explore thicknesses, sheet formats, edge finish and custom panel enquiries.
Review Low-E coated glass for custom glazing. Specify pane thickness, coating face, heat treatment, IGU build-up and thermal or solar performance targets.
Copyright © 2025 Qingdao Globalstar Glass Technology Co., Ltd. Powered by HiCheng
SiteMap Privacy Policy
